Back to top
Send SMS Send Inquiry
Home » Products » PVC Water Stop » PVC Expansion Joint

PVC Expansion Joint

PVC Expansion Joint
PVC Expansion Joint
Send Inquiry
Product Code : DP WS - 04
Brand Name : DURON
Product Description

Leveraging on support of dexterous employees, advanced infrastructure and years of experience, our firm has been able to offer PVC Expansion Joint. It is manufactured by our employees with PVC and then stringently checked so that a highly qualitative product can be brought out into the market. We have appointed dexterous logistics personnel, who enable us to deliver this product at the end of customers within given time-frame. Offered PVC Expansion Joint is widely used in expansion and contraction joints owing to its rugged construction and durability. 

Specification:

Type
Width
Thickness
Description And Suitability
150AU
150
6MM
For moderate pressure in RCC wall or slab.
wall/slap not less thicker than 150mm.
150B
150
4 TO5MM
For low hydro-static pressure heads, used in exp./
contraction joints.
150A
150
8TO11MM
For high hydro-static pressure heads, used in exp./
contraction joints.
230G
230
4TO5MM
For medium pressure heads and wall not less
thicker than 230mm.
230GU
230
6MM
For medium pressure heads, for construction and
expansion/cibtractuib hiubts
225/230D
225/230
8TO11MM
For High heads, utility same as 230 GU.
230KE
230
5MM
Surface type, for expansion/contraction joints.
230KD
230
5MM
For construction joints, externally placed type of
PVC waterstop.
240RS
240
5MM
Multi Rids and serrations, ideal waterstop for
construction joints.
240H
240
8TO10MM
For moderate to high pressure head, used in
Power Houses & other improtant RCC structures.
230XA
230
10MM
For high expansion/contraction & settlement joints.
230XB
230
5MM
For medium pressure, utility same as 230 XA.
300LU
300
6MM
Multi Ribbed and sarrated, ideal waterstop for under
ground structures, in expansion/contraction joints.
300LUNB
300
6MM
Ditto as above but without central bulb for
construction joints.
300N
300
10MM
As per IS 12200 of 1987, Sketch shown, in the
Dams, syphons, Aqueducts etc.
300F
300
9TO12MM
A standard design of CWC for Dams & other
Hydraulic structures with high pressure heads.
300KY
300
5MM
Surface type without crack inducer, bu
same as 320KZ.
300KZ
320
5MM
Surface type without crack inducer, used for
construction joints, approved design of CPWD.
150 IS
150
7.5,,
Replaceable without central bulb.
300 IS
300
10MM
Replaceable type with a trapezoidal central bulb protruded on
the same face where semi circular colid end bulbs are projected
to ensure basic grip.
NCL
--
--
To be used in Canal lining as Longitudinal joint (contractio joint)
in cement concrete is in plastic condition.
NCT
--
--
To be used in Canal lining as Transverse joint (Expansion joint)
in cement concreate lining when concrete is in plastic condition.

 


DURON POLYVINYLS PVT. LTD.
X


DURON POLYVINYLS PVT. LTD.
khasra no 4651/279, Near Chungi, Daultabad Road, Gurugram - 122001, Haryana, India
Phone :+918068091417
Mr. Nishank Tandon (Director)
Mobile :+918068091417

Product Showcase
Send SMS Send Inquiry